Synthetic underlayment
The whole deck is covered with lapped underlayment before any shingle goes down.
Shingle Roofing
Shingle Roof Installation Closter, NJ
A new shingle roof in Closter is a system of layers, and each one has to go on in the right order for the shingles to do their job, whether the roof is on a new home, an addition or a reroof. Dial (551) 395-0646 to talk with a local roofer about a new shingle roof.
What you see from the street is maybe half of a shingle roof. The layers under the shingles include drip edge, ice and water shield, underlayment and starter strip, each with its own job. Flashing and attic ventilation round it out, and most leaks on newer roofs come from those details rather than the shingles.
The first decision is the shingle itself. 3-tab shingles are thin and uniform, and architectural shingles are thicker laminated shingles with a textured, shadowed look and higher wind ratings. Where hail is a concern, Class 4 impact-resistant shingles are worth a look, and your insurer can tell you whether they change anything on your policy.
Shingles are made for sloped roofs. Asphalt shingles generally need a slope of at least 2 in 12, and roofs between 2 in 12 and 4 in 12 need extra underlayment. Porches and low additions often need a different material where they tie into the main roof.
Many shingle roof installation calls in Closter also turn up a need for shingle roof replacement or roof installation.
Dealing with this in Closter, NJ right now? Call (551) 395-0646 and describe the problem to a roofer who works in Closter.
Call nowThe process
How shingle roof installation works
Each layer goes on in a set order so water always runs over, never under.
Prepare the deck
On a reroof or new build, the deck is inspected and fixed first, since shingles follow every dip beneath them. A wet deck is never covered.
Drip edge at the eaves
Drip edge goes along the eaves, then ice and water shield runs up from the eave edge and down every valley. That membrane seals around nails where ice backs water up.
Lay the underlayment
The rest of the deck is covered in underlayment, lapped so each row sheds onto the one below, with rake drip edge on top. Synthetic underlayment is lighter, stronger and less likely to wrinkle than felt.
Set the first course
The starter row seals the bottom edge and rakes of the roof. That is where wind damage usually begins on a poorly built roof.
Install the field
Shingles go on in offset courses with nails in the marked nailing strip, and step flashing is woven in with each course along walls. Counter flashing laps over the step flashing at chimneys and walls.
Ridge vent
The ridge gets a continuous vent and cap shingles, and the soffits are checked for open intake. Too little intake makes a ridge vent pull air the wrong way.
What is included
Parts of a shingle installation
Eave membrane
Self-adhering membrane is applied at the eaves and in valleys beneath the underlayment and shingles.
Choosing a shingle
3-tab, architectural or impact-resistant shingles are matched to the house before materials are ordered.
Flashing details
Every wall, chimney and pipe gets new flashing, and a ridge vent caps the peak which is where most leaks would otherwise start.
Starter strip
The edges get drip edge and starter shingles which keeps wind from peeling up the first course.
Related service
Architectural Shingle Installation Closter, NJ
Architectural shingles go on over the same deck, underlayment and starter as any shingle, with their own nailing pattern. The double thickness only holds if the nails catch both layers, so placement is checked as the roof goes on. Matching hip and ridge cap shingles and a compatible starter keep the look and wind rating consistent.
In Closter, NJ, architectural shingles are the common choice for both new homes and reroofs. Their weight and laminated build give them higher wind ratings and a longer life. A sample board viewed outside, next to the siding, is the best way to choose a color.
Related service
Asphalt Shingle Roof Installation Closter, NJ
Asphalt shingle roof installation is standard work, but the quality varies a lot from one crew to the next. Most early leaks on new shingle roofs come from flashing, nailing or missing starter, not from the shingles. It is fair to ask which underlayment and ice barrier will go on and where.
Most asphalt shingle installs in Closter wrap up quickly once materials are on site. Cold weather slows the factory sealant, so shingles laid in winter may need hand sealing. Rain delays are normal because the deck has to stay dry.
Local help
Shingle Roof Installation Near Me
New shingle roofs in Closter go on everything from new houses and additions to reroofs of older homes. Across Closter and nearby communities including Demarest, Norwood, Harrington Park and Haworth, architectural shingles have replaced 3-tab as the usual pick on new installations, so it pays to talk through wind ratings and impact resistance before choosing. Searching for shingle roof installation near me? Ask how the flashing and ventilation will be handled.
Need shingle roof installation around Closter? Call (551) 395-0646 for a Closter roofer who serves the towns around it too.
What the local climate does to a roof
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Closter is busiest after a hard winter and before the next one.
Why call
Why fix it now
Smaller repairs
Small roof problems caught early usually stay small repairs.
Local knowledge
Roofers in Closter know the roof types and weather wear common in local homes.
Clear next steps
Ask the roofer about the cause, the options and the estimate before work starts.
Shingle Roof Installation FAQ
What goes under the shingles on a new roof?
The layers beneath shingles are drip edge, ice barrier, underlayment and starter strip, in that general order. Felt still works, but synthetic is tougher and holds up better if the roof sits open. Check that the shingle instructions and local code are both followed.
What is the difference between 3-tab and architectural shingles?
3-tab shingles are a single flat layer with cutouts, while architectural shingles are two laminated layers. The thicker build gives architectural shingles better wind resistance and a longer life, and many lines no longer offer 3-tab. 3-tab still works for sheds, garages or matching an existing roof.
Can shingles be installed in cold weather?
Shingles go on best in mild, dry conditions. Cold-weather installs are done regularly, with extra care for brittle shingles and hand sealing where the strips will not activate. Whatever the season, the deck has to be dry.
How steep does a roof need to be for shingles?
The usual minimum for shingles is a pitch of 2 in 12. Roofs that are low but still within range get added underlayment protection. Porches and additions below that line need a low slope material.
How many nails should each shingle have?
Nail count and placement decide how well shingles stay on in wind. Four nails per shingle is common, with six where the shingle instructions or local code call for high-wind nailing. Each nail has to sit in the nailing zone, flush with the surface, not too high and not driven through.
More questions? Call (551) 395-0646
Other services that may help
Shingle Roof Replacement
Tearing off a worn shingle roof down to the decking and putting on a new one, including permits, cleanup and a final check.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, so it sheds water at every edge and seam.
Learn moreRoof Ventilation
Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, without mixing vent types that work against each other.
Learn moreGutter Installation
New gutters and downspouts formed to fit the house, with the right size, pitch and outlet placement, from K-style aluminum to half-round and copper.
Learn more
Looking for something else?
See all roofing servicesNeed shingle roof installation in Closter, NJ?
Call now for Closter shingle roof installation and help in the towns around it.